Analysis of phantom centering positioning on image noise and radiation dose in axial scan type of brain CT

ABSTRACT

This study examined the dose and image quality according to the position change of a human phantom in a CT scan. This study used an MDCT 128 Slice CT Scanner instrument. An axial scan was performed with a 16 cm CTDI phantom of a human phantom, and the dose was measured using a pencil chamber meter. The phantom was scanned 10 cm above and below the isocenter and 15 cm above the right and left. The position of the phantom is indicated by C-0 in the isocenter position, S-10 in the upper 10 cm, I-10 in the lower 10 cm, R-15 in the right 15 cm, and L-15 in the left 15 cm. The test was performed 30 times using the brain CT protocol to calculate the dose and the dose width product (DWP). The acquired images were analyzed using the ImageJ program. Statistical analysis was performed using SPSS with one-way ANOVA (p < .05). The mean DWP values of the CT scanner were C-0 31.97 mGy·cm, S-10 24.52 mGy·cm, I-10 24.28 mGy· cm, R-15 17.95 mGy·cm, and L15 17.6 mGy·cm. Compared to the isocenter (C-0), the DLP values measured at each site were 23.3% for S-10, 24% for I-10, 43.8% for R-15, and 44.9% for L15. A significant difference in the one-way ANOVA statistical process was observed (p>0.05). C-0 was measured to be 7.42 HU, S-10 7.87 HU, I-10 8.4 HU, R-15 117 HU, and L-15 13.6 HU for evaluating the image quality. Compared to C-0, S-10 was 5.39%, I-10 was 13.2%, R-15 was 57.6%, and L-15 was 83.2%. The PSNR for S-10, I-10, R-15, and L-15 was 17.37, 17.5, 16.62, and 16.37 dB, respectively. A good quality image can be obtained by positioning the subject precisely in the isocenter in the axial scan, if possible, because the irradiated dose to the subject is low, which can lead to an increase in noise in image reconstruction.     

Synthesis and characterization of chiral poly(alkyl isocyanates) by coordination polymerization using a chiral half‐titanocene complex

A new chiral half‐titanocene complex, [CpTiCl₂(O‐(S)?2‐Bu)], is synthesized and characterized by ¹H and ¹³C NMR spectroscopy. This complex is employed for the coordination polymerization of n‐butyl and n‐hexyl‐ isocyanate leading to chiral polymers, as revealed by their CD spectra. Only the left‐handed helix is produced, due to the chiral (S)?2‐butoxy group, which is bound to the polymer chain end. The polymerization of 3‐(triethoxysilyl)propyl isocyanate produces less soluble polymers. On the other hand, phenyl isocyanate reacts slowly with the complex leading quantitatively and selectively to triphenyl isocyanurate. 2‐Ethylhexyl isocyanate is slowly and selectively cyclotrimerized in the presence of the half‐titanocene complex. However, a statistical copolymer of 2‐ethylhexyl isocyanate and hexyl isocyanate is produced. The reaction of benzyl isocyanate with the complex leads to a mixture of low molecular weight polymer and cyclotrimer. The polymers are characterized using SEC, NMR, and CD spectroscopy and their thermal properties are investigated by TGA/DSC analysis. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2141–2151     

Multicomponent Self‐Assembly with a Shape‐Persistent N‐Heterotriangulene Macrocycle on Au(111)

Multicomponent network formation by using a shape‐persistent macrocycle ( MC6 ) at the interface between an organic liquid and Au(111) surface is demonstrated. MC6 serves as a versatile building block that can be coadsorbed with a variety of organic molecules based on different types of noncovalent interactions at the liquid–solid interface. Scanning tunneling microscopy (STM) reveals the formation of crystalline bicomponent networks upon codeposition of MC6 with aromatic molecules, such as fullerene (C₆₀) and coronene. Tetracyanoquinodimethane, on the other hand, was found to induce disorder into the MC6 networks by adsorbing on the rim of the macrocycle. Immobilization of MC6 itself was studied in two different noncovalently assembled host networks. MC6 assumed a rather passive role as a guest and simply occupied the host cavities in one network, whereas it induced a structural transition in the other. Finally, the central cavity of MC6 was used to capture C₆₀ in a complex three‐component system. Precise immobilization of organic molecules at discrete locations within multicomponent networks, as demonstrated here, constitutes an important step towards bottom‐up fabrication of functional surface‐based nanostructures.     

From curing kinetics to network structure: A novel approach to the modeling of the network buildup of epoxy–anhydride thermosets

The curing kinetics and network buildup during curing of epoxy–anhydride formulations using tertiary amines as initiators are reviewed in this work. A mechanism‐based kinetic and structural model has been defined, showing better prediction capabilities than previous living polymerization and simple regeneration models. The curing kinetics have been analyzed using differential scanning calorimetry (DSC), and the gelation during curing has been determined by combined thermomechanical analysis and DSC. The effect of initiator content and epoxy equivalent weight are taken into account. The network buildup has been modeled using a stochastic network buildup model based on the random combination of primary chains generated by the kinetic model. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 61–75     

Polymer complexes. LXXVI. Synthesis,characterization, CT‐DNA binding,molecular docking and thermal studies of sulfoxine polymer complexes

Novel polymer complexes of 8‐hydroxyquinoline‐5‐sulfonic acid hydrate ( H ₂ L ) with Cu²⁺, Co²⁺ and Ni²⁺ chloride were prepared and characterized. Microanalysis, magnetic susceptibility, IR spectra, electron spin resonance, mass spectra, X‐ray, molar conductance, thermal, and UV–Vis spectra studies have been used to confirm the structure of the prepared polymer complexes. The molecular and electronic structures of the hydrogen bond conformers for ligand ( H ₂ L ) were optimized theoretically and the quantum chemical parameters were calculated. On the basis of elemental and IR data, the chemical structure of metal chelates commensurate that the tri‐dentate (H₂L) coordinate to metal chlorides through oxygen atom of phenolic OH and oxygen atom of SO₃‐H group by replacing H atoms and nitrogen of the quinoline ring. The magnetic studies suggested the octahedral geometrical structure for all produced polymer complexes with general formula {[ML (OH₂)₃] .xH₂O}_n (M = Cu²⁺, x = 1.; Co²⁺, x = 2 and Ni²⁺, x = 2) in molar ratio (1:1). Coats–Redfern and Horowitz–Metzger methods have been used for calculating the activation thermodynamic parameters of the thermal decomposition for H ₂ L and its polymer complexes. The interaction between H ₂ L and its transition metal complexes with the calf thymus DNA (CT‐DNA) was determined by UV–Vis spectra. Binding efficiency between H ₂ L with the receptors of the prostate cancer (PDB code 2Q7L Hormone) and the breast cancer (PDB code 1JNX Gene regulation) was studied by molecular docking. The inhibition behaviour of H ₂ L against the corrosion of carbon steel / HCl (2 M) solution was studied by weight loss, Tafel polarisation, electrochemical impedance spectroscopy (EIS) and electrochemical frequency modulation (EFM) techniques. The adsorption isotherm was found to be Friendlish isotherm. The morphology of inhibited carbon steel? s surface was studied using scanning electron microscope (SEM) and energy dispersive X‐ray spectroscopy (EDS).     

Lower critical solution temperature sensitivity to structural changes in poly(N‐isopropyl acrylamide) homopolymers

The effect of the molecular weight on the lower critical solution temperature (LCST) has been discussed extensively, where LCST increased with molar mass, decreased or kept constant, which leads to confusion. This work is focused on the preparation of poly(N‐isopropyl acrylamide) homopolymers, obtained in a wide molecular weights range. The LCST behavior is analyzed by calorimetry and rheology, and a deep study of molecular features is carried out for a better knowledge of the influence of various parameters involved on LCST. Finally, the molecular weight trend is observed, and its influence on LCST is compared with the effect of other parameters as polymer concentration in water, end‐group effect, and tacticity. It is observed that other parameters such tacticity and end‐group effect will affect the LCST behavior over molecular weight, if this one is not high enough. Furthermore, the study of the LCST ranges will be a useful tool for analyzing the molecular weight trends. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1386–1393     

Ranking Oxidant Sensitiveness: A Guide for Synthetic Utility

Common oxidants used in chemical synthesis, including newly developed perruthenates, were evaluated in the context of understanding (and better appreciating) the sensitiveness and associated potential hazards of these reagents. Analysis using sealed cell differential scanning calorimetry (scDSC) facilitated Yoshida correlations, which were compared to impact sensitiveness and electrostatic discharge experiments (ESD), that enabled sensitiveness ranking. Methyltriphenylphoshonium perruthenate (MTP3, 8 ), isoamyltriphenylphosphonium perruthenate (ATP3, 7 ) and tetraphenylphosphonium perruthenate (TP3, 9 ) were found to be the most sensitive followed by 2-iodoxybenzoic acid (IBX, 2 ) and benzoyl peroxide (BPO, 10 ), whereas the most benign were observed to be Oxone ( 12 ), manganese dioxide (MnO₂, 13 ), and N-bromosuccinimide (NBS, 17 ).     

Evolution of long-period stacking order (LPSO) in Mg97Zn1Gd2 cast alloys viewed by HAADF-STEM multi-scale electron tomography

We have studied three-dimensional (3D) structures and growth processes of 14H-type long-period stacking order (LPSO) formed in Mg₉₇Zn₁Gd₂ cast alloys by single tilt-axis electron tomography (ET) using high-angle annular dark-field scanning transmission electron microscopy. Evolution of the solute-enriched stacking faults (SFs) and the 14H LPSO by ageing were visualised in 3D with a high spatial resolution in multi-scale fields of views from a few nanometres to ~10 μm. Lateral growth of the solute-enriched SFs and the LPSO in the (0?0?0?1)_Mg plane is notable compared to the out-of-plane growth in the [0?0?0?1]_Mg direction. The 14H LPSO grows at the cost of decomposition of the (Mg, Zn)₃Gd-type precipitates, and accompany a change of in-plane edge angles from 30 to 60°. We have updated the Time–Temperature–Transformation diagram for precipitation in Mg₉₇Zn₁Gd₂ alloys: starting temperatures of both solute-enriched SFs and LPSO formation shifted to a shorter time side than those in the previous diagram.